pcb2gcode · eyal0 · Mar 1, 2026 · Feb 28, 2026
diff --git a/configure.ac b/configure.ac
@@ -2,7 +2,7 @@
 # Process this file with autoconf to produce a configure script.
 
 AC_PREREQ([2.71])
-AC_INIT([pcb2gcode], [2.5.0],
+AC_INIT([pcb2gcode], [3.0.1],
         [https://github.com/pcb2gcode/pcb2gcode/issues/new],
         [pcb2gcode],
         [https://github.com/pcb2gcode/pcb2gcode])

diff --git a/testing/broken_examples/split_config/expected/back.ngc b/testing/broken_examples/split_config/expected/back.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/broken_examples/split_config/expected/milldrill.ngc b/testing/broken_examples/split_config/expected/milldrill.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 ( This file uses a mill head of 0.03150inch to drill the 2 hole sizes. )
 ( Hole sizes: [0.0314961inch] [0.0394094inch] )

diff --git a/testing/broken_examples/split_config/expected/outline.ngc b/testing/broken_examples/split_config/expected/outline.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/D1MiniGSR/expected/back.ngc b/testing/gerbv_example/D1MiniGSR/expected/back.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Millimeters per minute feed rate. )

diff --git a/testing/gerbv_example/D1MiniGSR/expected/drill.ngc b/testing/gerbv_example/D1MiniGSR/expected/drill.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 ( This file uses 2 drill bit sizes. )

diff --git a/testing/gerbv_example/D1MiniGSR/expected/front.ngc b/testing/gerbv_example/D1MiniGSR/expected/front.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Millimeters per minute feed rate. )

diff --git a/testing/gerbv_example/D1MiniGSR/expected/outline.ngc b/testing/gerbv_example/D1MiniGSR/expected/outline.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Millimeters per minute feed rate. )

diff --git a/testing/gerbv_example/Easy-SDR_HF_Upconverter_SMD_Gerbers/expected/back.ngc b/testing/gerbv_example/Easy-SDR_HF_Upconverter_SMD_Gerbers/expected/back.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Millimeters per minute feed rate. )

diff --git a/testing/gerbv_example/Easy-SDR_HF_Upconverter_SMD_Gerbers/expected/drill.ngc b/testing/gerbv_example/Easy-SDR_HF_Upconverter_SMD_Gerbers/expected/drill.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 ( This file uses 7 drill bit sizes. )

diff --git a/testing/gerbv_example/Easy-SDR_HF_Upconverter_SMD_Gerbers/expected/front.ngc b/testing/gerbv_example/Easy-SDR_HF_Upconverter_SMD_Gerbers/expected/front.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Millimeters per minute feed rate. )

diff --git a/testing/gerbv_example/Easy-SDR_HF_Upconverter_SMD_Gerbers/expected/outline.ngc b/testing/gerbv_example/Easy-SDR_HF_Upconverter_SMD_Gerbers/expected/outline.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Millimeters per minute feed rate. )

diff --git a/testing/gerbv_example/KNoT-Gateway Mini Starter Board/expected/back.ngc b/testing/gerbv_example/KNoT-Gateway Mini Starter Board/expected/back.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Millimeters per minute feed rate. )

diff --git a/testing/gerbv_example/KNoT-Gateway Mini Starter Board/expected/front.ngc b/testing/gerbv_example/KNoT-Gateway Mini Starter Board/expected/front.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Millimeters per minute feed rate. )

diff --git a/testing/gerbv_example/KNoT_Thing_Starter_Board/expected/back.ngc b/testing/gerbv_example/KNoT_Thing_Starter_Board/expected/back.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Millimeters per minute feed rate. )

diff --git a/...g/gerbv_example/KeyboardControllerM102/expected/KeyboardControllerM102Silkscreen_back.ngc b/...g/gerbv_example/KeyboardControllerM102/expected/KeyboardControllerM102Silkscreen_back.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 

diff --git a/.../gerbv_example/KeyboardControllerM102/expected/KeyboardControllerM102Silkscreen_front.ngc b/.../gerbv_example/KeyboardControllerM102/expected/KeyboardControllerM102Silkscreen_front.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 

diff --git a/testing/gerbv_example/Rotary-Encoder-Breakout/expected/back.ngc b/testing/gerbv_example/Rotary-Encoder-Breakout/expected/back.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/am-test-counterclockwise/expected/back.ngc b/testing/gerbv_example/am-test-counterclockwise/expected/back.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/am-test-extended/expected/back.ngc b/testing/gerbv_example/am-test-extended/expected/back.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/am-test-millinfeed/expected/back.ngc b/testing/gerbv_example/am-test-millinfeed/expected/back.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/am-test-voronoi-extra-passes/expected/back.ngc b/testing/gerbv_example/am-test-voronoi-extra-passes/expected/back.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/am-test-voronoi-front/expected/front.ngc b/testing/gerbv_example/am-test-voronoi-front/expected/front.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/am-test-voronoi-wide-extra-passes/expected/back.ngc b/testing/gerbv_example/am-test-voronoi-wide-extra-passes/expected/back.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/am-test-voronoi/expected/back.ngc b/testing/gerbv_example/am-test-voronoi/expected/back.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/am-test/expected/back.ngc b/testing/gerbv_example/am-test/expected/back.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/backtrack/expected/test-Edge.Cuts-front-1.2mm.nc b/testing/gerbv_example/backtrack/expected/test-Edge.Cuts-front-1.2mm.nc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Millimeters per minute feed rate. )

diff --git a/testing/gerbv_example/backtrack/expected/test-F.Cu-front-0.3mm.nc b/testing/gerbv_example/backtrack/expected/test-F.Cu-front-0.3mm.nc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Millimeters per minute feed rate. )

diff --git a/testing/gerbv_example/backtrack_0/expected/test-Edge.Cuts-front-1.2mm.nc b/testing/gerbv_example/backtrack_0/expected/test-Edge.Cuts-front-1.2mm.nc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Millimeters per minute feed rate. )

diff --git a/testing/gerbv_example/backtrack_0/expected/test-F.Cu-front-0.3mm.nc b/testing/gerbv_example/backtrack_0/expected/test-F.Cu-front-0.3mm.nc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Millimeters per minute feed rate. )

diff --git a/testing/gerbv_example/edge-cuts-broken-loop/expected/outline.ngc b/testing/gerbv_example/edge-cuts-broken-loop/expected/outline.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/edge-cuts-inside-cuts/expected/outline.ngc b/testing/gerbv_example/edge-cuts-inside-cuts/expected/outline.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/example_board_al_custom/expected/back.ngc b/testing/gerbv_example/example_board_al_custom/expected/back.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Gcode for custom )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/example_board_al_custom/expected/front.ngc b/testing/gerbv_example/example_board_al_custom/expected/front.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Gcode for custom )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/example_board_al_custom/expected/outline.ngc b/testing/gerbv_example/example_board_al_custom/expected/outline.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/example_board_al_custom_tiled/expected/back.ngc b/testing/gerbv_example/example_board_al_custom_tiled/expected/back.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Gcode for custom )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/example_board_al_custom_tiled/expected/front.ngc b/testing/gerbv_example/example_board_al_custom_tiled/expected/front.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Gcode for custom )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/example_board_al_custom_tiled/expected/outline.ngc b/testing/gerbv_example/example_board_al_custom_tiled/expected/outline.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/example_board_al_linuxcnc/expected/back.ngc b/testing/gerbv_example/example_board_al_linuxcnc/expected/back.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Gcode for linuxcnc )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/example_board_al_linuxcnc/expected/front.ngc b/testing/gerbv_example/example_board_al_linuxcnc/expected/front.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Gcode for linuxcnc )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/example_board_al_linuxcnc/expected/outline.ngc b/testing/gerbv_example/example_board_al_linuxcnc/expected/outline.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/example_board_al_linuxcnc_tiled/expected/back.ngc b/testing/gerbv_example/example_board_al_linuxcnc_tiled/expected/back.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Gcode for linuxcnc )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/example_board_al_linuxcnc_tiled/expected/front.ngc b/testing/gerbv_example/example_board_al_linuxcnc_tiled/expected/front.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Gcode for linuxcnc )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/example_board_al_linuxcnc_tiled/expected/outline.ngc b/testing/gerbv_example/example_board_al_linuxcnc_tiled/expected/outline.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Gcode for linuxcnc )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/example_board_al_mach3/expected/back.ngc b/testing/gerbv_example/example_board_al_mach3/expected/back.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Gcode for mach3 )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/example_board_al_mach3/expected/front.ngc b/testing/gerbv_example/example_board_al_mach3/expected/front.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Gcode for mach3 )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/example_board_al_mach3/expected/outline.ngc b/testing/gerbv_example/example_board_al_mach3/expected/outline.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/example_board_al_mach3_tiled/expected/back.ngc b/testing/gerbv_example/example_board_al_mach3_tiled/expected/back.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Gcode for mach3 )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/example_board_al_mach3_tiled/expected/front.ngc b/testing/gerbv_example/example_board_al_mach3_tiled/expected/front.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Gcode for mach3 )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/example_board_al_mach3_tiled/expected/outline.ngc b/testing/gerbv_example/example_board_al_mach3_tiled/expected/outline.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Gcode for mach3 )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/example_board_al_mach4/expected/back.ngc b/testing/gerbv_example/example_board_al_mach4/expected/back.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Gcode for mach4 )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/example_board_al_mach4/expected/front.ngc b/testing/gerbv_example/example_board_al_mach4/expected/front.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Gcode for mach4 )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/example_board_al_mach4/expected/outline.ngc b/testing/gerbv_example/example_board_al_mach4/expected/outline.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/example_board_al_mach4_tiled/expected/back.ngc b/testing/gerbv_example/example_board_al_mach4_tiled/expected/back.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Gcode for mach4 )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/example_board_al_mach4_tiled/expected/front.ngc b/testing/gerbv_example/example_board_al_mach4_tiled/expected/front.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Gcode for mach4 )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/example_board_al_mach4_tiled/expected/outline.ngc b/testing/gerbv_example/example_board_al_mach4_tiled/expected/outline.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Gcode for mach4 )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/example_board_new_default/expected/back.ngc b/testing/gerbv_example/example_board_new_default/expected/back.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/example_board_new_default/expected/drill.ngc b/testing/gerbv_example/example_board_new_default/expected/drill.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 ( This file uses 1 drill bit sizes. )

diff --git a/testing/gerbv_example/example_board_new_default/expected/front.ngc b/testing/gerbv_example/example_board_new_default/expected/front.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/example_board_new_default/expected/outline.ngc b/testing/gerbv_example/example_board_new_default/expected/outline.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/example_board_new_mirror_x/expected/back.ngc b/testing/gerbv_example/example_board_new_mirror_x/expected/back.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/example_board_new_mirror_x/expected/drill.ngc b/testing/gerbv_example/example_board_new_mirror_x/expected/drill.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 ( This file uses 1 drill bit sizes. )

diff --git a/testing/gerbv_example/example_board_new_mirror_x/expected/front.ngc b/testing/gerbv_example/example_board_new_mirror_x/expected/front.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/example_board_new_mirror_x/expected/outline.ngc b/testing/gerbv_example/example_board_new_mirror_x/expected/outline.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/example_board_new_mirror_y/expected/back.ngc b/testing/gerbv_example/example_board_new_mirror_y/expected/back.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 G94 ( Inches per minute feed rate. )

diff --git a/testing/gerbv_example/example_board_new_mirror_y/expected/drill.ngc b/testing/gerbv_example/example_board_new_mirror_y/expected/drill.ngc
@@ -1,4 +1,4 @@
-( pcb2gcode 2.5.0 )
+( pcb2gcode 3.0.1 )
 ( Software-independent Gcode )
 
 ( This file uses 1 drill bit sizes. )