command output:
pcb2gcode--back="/home/user/Downloads/Easy-SDR-master/HF Upconverter/SMD/Gerbers/Gerber_BottomLayer.GBL" --drill="/home/user/Downloads/Easy-SDR-master/HF Upconverter/SMD/Gerbers/Gerber_Drill_PTH.DRL" --front="/home/user/Downloads/Easy-SDR-master/HF Upconverter/SMD/Gerbers/Gerber_TopLayer.GTL" --outline="/home/user/Downloads/Easy-SDR-master/HF Upconverter/SMD/Gerbers/Gerber_BoardOutline.GKO" --output-dir="/home/user/Downloads/Easy-SDR-master/HF Upconverter/SMD/Gerbers/kicad_import-out/pcb2gcode-out" --metric=true --metricoutput=true --mirror-axis=0.0000 --mirror-yaxis=false --nog64=true --optimise=0.0100 --tile-x=1 --tile-y=1 --tolerance=0.0060 --zchange=25.0000 --zchange-absolute=false --zero-start=true --zsafe=1.0000 --extra-passes=2 --mill-feed=200 --mill-speed=7000 --offset=0.0200 --voronoi=false --zwork=-0.0250 --drill-feed=50 --drill-side=auto --drill-speed=7000 --milldrill=false --nog81=true --nog91-1=true --onedrill=false --zdrill=-1.5000 --bridges=0.5000 --bridgesnum=6 --cut-feed=12 --cut-infeed=0.6000 --cut-side=auto --cut-speed=7000 --cut-vertfeed=50 --cutter-diameter=1.1500 --fill-outline=true --zbridges=-0.5000 --zcut=-1.2000
The files:
thefiles.zip
Running debian bullseye, pcb2gcode 2.4.0, pcb2gcodeGUI 1.3.2-1
Trying to get this to grind out on the CNC, after i add the outline file, i get no processed files, just empty headers in output dir.
This is from https://github.com/IgrikXD/Easy-SDR (there is no issues tab there)
Even when loading (importing into kicad from gerbview) files i see nothing wrong with the outline file.
Importing front side... DONE.
Importing back side... DONE.
Importing outline... DONE.
Processing input files... Some nearly-connected lines in the gerber input have been adjusted to properly connect
Found an unconnected loop while parsing a gerber file while expecting only loops
DONE.
Exporting back... DONE. (Height: 49.544mm Width: 82.056mm)
Exporting front... DONE. (Height: 49.544mm Width: 82.056mm)
Exporting outline... DONE. (Height: 49.544mm Width: 82.056mm) The board should be cut from the FRONT side.
Importing drill... DONE.
Exporting milldrill... Exporting drill... DONE. The board should be drilled from the FRONT side.
END.
command output:
pcb2gcode--back="/home/user/Downloads/Easy-SDR-master/HF Upconverter/SMD/Gerbers/Gerber_BottomLayer.GBL" --drill="/home/user/Downloads/Easy-SDR-master/HF Upconverter/SMD/Gerbers/Gerber_Drill_PTH.DRL" --front="/home/user/Downloads/Easy-SDR-master/HF Upconverter/SMD/Gerbers/Gerber_TopLayer.GTL" --outline="/home/user/Downloads/Easy-SDR-master/HF Upconverter/SMD/Gerbers/Gerber_BoardOutline.GKO" --output-dir="/home/user/Downloads/Easy-SDR-master/HF Upconverter/SMD/Gerbers/kicad_import-out/pcb2gcode-out" --metric=true --metricoutput=true --mirror-axis=0.0000 --mirror-yaxis=false --nog64=true --optimise=0.0100 --tile-x=1 --tile-y=1 --tolerance=0.0060 --zchange=25.0000 --zchange-absolute=false --zero-start=true --zsafe=1.0000 --extra-passes=2 --mill-feed=200 --mill-speed=7000 --offset=0.0200 --voronoi=false --zwork=-0.0250 --drill-feed=50 --drill-side=auto --drill-speed=7000 --milldrill=false --nog81=true --nog91-1=true --onedrill=false --zdrill=-1.5000 --bridges=0.5000 --bridgesnum=6 --cut-feed=12 --cut-infeed=0.6000 --cut-side=auto --cut-speed=7000 --cut-vertfeed=50 --cutter-diameter=1.1500 --fill-outline=true --zbridges=-0.5000 --zcut=-1.2000
The files:
thefiles.zip
Running debian bullseye, pcb2gcode 2.4.0, pcb2gcodeGUI 1.3.2-1
Trying to get this to grind out on the CNC, after i add the outline file, i get no processed files, just empty headers in output dir.
This is from https://github.com/IgrikXD/Easy-SDR (there is no issues tab there)
Even when loading (importing into kicad from gerbview) files i see nothing wrong with the outline file.
Importing front side... DONE.
Importing back side... DONE.
Importing outline... DONE.
Processing input files... Some nearly-connected lines in the gerber input have been adjusted to properly connect
Found an unconnected loop while parsing a gerber file while expecting only loops
DONE.
Exporting back... DONE. (Height: 49.544mm Width: 82.056mm)
Exporting front... DONE. (Height: 49.544mm Width: 82.056mm)
Exporting outline... DONE. (Height: 49.544mm Width: 82.056mm) The board should be cut from the FRONT side.
Importing drill... DONE.
Exporting milldrill... Exporting drill... DONE. The board should be drilled from the FRONT side.
END.