<html lang="en">

<meta charset="UTF-8">

<title>Setting up Geth on a Raspberry Pi</title>

<h2>You will need</h2>

<ul>

<li> Raspberry Pi, power supply, case</li>

<li> 64GB micro SD Card</li>

<li> Ethernet Cable</li>

</ul>

<h2>Instructions</h2>

Download this <a href = "http://www.ethembedded.com/downloads/Raspi2/EthEmbedded-RPi2_3-Ubuntu_Mate-Geth1.3.5-2016-03-06.img.tar.gz" > image </a>

<p>Follow the to write the image to your SD card</p>

<a href="https://www.raspberrypi.org/documentation/installation/installing-images/linux.md"> Linux Instructions</a> <br/>

<a href="http://sourceforge.net/projects/win32diskimager/"> Windows Disk imager</a>

<p> Eject and remove your SD card and assembly your Pi with the new card</p>

<h3>Start your Raspberry Pi</h3>

<p>Boot up and login with <br/>

username <b>eth</b><br/>

password <b>eth</b> </p>

<p>Change the password with the <b>passwd</b> command</p>

<h4>Resize the partition to use the whole SD card</h4>

<p> type <b> sudo fdisk /dev/mmcblk0 </b></p>

re create the partition by entering the following when prompted<br/><br/>

<b>d</b> – delete<br/>

<b>2</b> – partition to be deleted<br/>

<b>n</b> – create new partition<br/>

<b>p</b> – select partition type primary<br/>

<b>enter</b> - select default<br/>

<b>enter</b> – select default start block<br/>

<b>enter</b> – select default last block<br/>

<b>w</b> – to write our changes<br/>

Now reboot the machine :<br/>

<b>sudo reboot</b><br/>

when the machine restarts login again <br>

then run<br/><br/>

<b>sudo resize2fs /dev/mmcblk0p2 </b> – to expand the partition<br/><br/>

You can check with <b>df -h</b><br/>