Repository navigation
How do I wire my Codebug to my Raspberry Pi? #2
Description
I can see how the code gets installed, I can get the cbg file installed on my Codebug all from my Raspberry Pi (it appears as /dev/sda1 when I hold button A and plug it in). But, the missing piece is how to wire RPi pins #8 (TXD), #10 (RXD) & #6 (GND) to my Codebug.
Or if I use a FTDI USB serial how to wire TXD, RXD and GND to the Codebug.
Do I need to be worried about 3V3 vs 5V0?
I've got the same issue with your I2C tethering.
Activity
tompreston commentedon Jul 30, 2015
Hi,
After loading the cbg file onto CodeBug it should appear as a USB serial device (at
/dev/ttyACM0, on Linux) when you plug it in via USB. You don't have to hold any buttons and there is no wiring necessary.Hm, I probably should have mentioned this in the docs... I'll fix that now! Haha!
DougieLawson commentedon Jul 30, 2015
Thank you.