/* libluaKOS - KOS functions for DS lua by SWAT

*/

$#include <kos.h>

$size_t *size_t_new() { return (size_t *) malloc(sizeof(size_t)); }

$void size_t_delete(size_t *s) { return free(s); }

module KOS

{

/* PVR texture memory pointer; unlike the old "TA" system, PVR pointers

in the new system are actually SH-4 compatible pointers and can

be used directly in place of ta_txr_map(). */

typedef void * pvr_ptr_t;

/* PVR list specification */

typedef uint32 pvr_list_t;

typedef unsigned long long uint64;

typedef unsigned long uint32;

typedef unsigned short uint16;

typedef unsigned char uint8;

typedef long long int64;

typedef long int32;

typedef short int16;

typedef char int8;

/* Volatile types */

typedef volatile uint64 vuint64;

typedef volatile uint32 vuint32;

typedef volatile uint16 vuint16;

typedef volatile uint8 vuint8;

typedef volatile int64 vint64;

typedef volatile int32 vint32;

typedef volatile int16 vint16;

typedef volatile int8 vint8;

/* Pointer arithmetic types */

typedef uint32 ptr_t;

typedef unsigned char u_char;

typedef unsigned short u_short;

typedef unsigned int u_int;

typedef unsigned long u_long;

typedef unsigned short ushort;

typedef unsigned int uint;

typedef int size_t;

//#if 0

/* File-specific types */

typedef size_t ssize_t;

typedef size_t off_t;

//#endif

// by SWAT for lua

size_t *size_t_new();

void size_t_delete(size_t *s);

/* Flush a range of i-cache, given a physical address range */

void icache_flush_range(uint32 start, uint32 count);

/* Invalidate a range of o-cache/d-cache, given a physical address range */

void dcache_inval_range(uint32 start, uint32 count);

/* Flush a range of o-cache/d-cache, given a physical address range */

void dcache_flush_range(uint32 start, uint32 count);

/* Replace the currently running image with whatever is at

the pointer; note that this call will never return. */

void arch_exec_at(const void *image, uint32 length, uint32 address);

void arch_exec(const void *image, uint32 length);

/** \brief Directory entry.

All VFS handlers must conform to this interface in their directory entries.

\headerfile kos/fs.h

*/

typedef struct kos_dirent {

int size; /**< \brief Size of the file in bytes. */

char name[MAX_FN_LEN]; /**< \brief Name of the file. */

time_t time; /**< \brief Last access/mod/change time (depends on VFS) */

uint32 attr; /**< \brief Attributes of the file. */

} dirent_t;

/** \brief File descriptor type */

typedef int file_t;

/** \brief Invalid file handle constant (for open failure, etc) */

#define FILEHND_INVALID ((file_t)-1)

/* Open modes */

/** \defgroup open_modes File open modes

@{

*/

#define O_RDONLY 0

#define O_WRONLY 1

#define O_RDWR 2

#define O_APPEND 0x0008

#define O_CREAT 0x0200

#define O_TRUNC 0x0400

#define O_MODE_MASK 0x0f /**< \brief Mask for mode numbers */

#define O_ASYNC 0x0200 /**< \brief Open for asynchronous I/O */

#define O_DIR 0x1000 /**< \brief Open as directory */

#define O_META 0x2000 /**< \brief Open as metadata */

/** @} */

/** \defgroup seek_modes Seek modes

These are the values you can pass for the whence parameter to fs_seek().

@{

*/

#define SEEK_SET 0 /**< \brief Set position to offset. */

#define SEEK_CUR 1 /**< \brief Seek from current position. */

#define SEEK_END 2 /**< \brief Seek from end of file. */

/** @} */

/* Standard file descriptor functions */

/** \brief Open a file on the VFS.

This function opens the specified file, returning a new file descriptor to

access the file.

\param fn The path to open.

\param mode The mode to use with opening the file. This may

include the standard open modes (O_RDONLY, O_WRONLY,

etc), as well as values from the \ref open_modes

list. Multiple values can be ORed together.

\return The new file descriptor on success, -1 on error.

*/

file_t fs_open(const char *fn, int mode);

/** \brief Close an opened file.

This function closes the specified file descriptor, releasing all resources

associated with the descriptor.

\param hnd The file descriptor to close.

\return 0 for success, -1 for error

*/

int fs_close(file_t hnd);

/** \brief Read from an opened file.

This function reads into the specified buffer from the file at its current

file pointer.

\param hnd The file descriptor to read from.

\param buffer The buffer to read into.

\param cnt The size of the buffer (or the number of bytes

requested).

\return The number of bytes read, or -1 on error. Note that

this may not be the full number of bytes requested.

*/

ssize_t fs_read(file_t hnd, void *buffer, size_t cnt);

/** \brief Write to an opened file.

This function writes the specfied buffer into the file at the current file

pointer.

\param hnd The file descriptor to write into.

\param buffer The data to write into the file.

\param cnt The size of the buffer, in bytes.

\return The number of bytes written, or -1 on failure. Note

that the number of bytes written may be less than

what was requested.

*/

ssize_t fs_write(file_t hnd, const void *buffer, size_t cnt);

/** \brief Seek to a new position within a file.

This function moves the file pointer to the specified position within the

file (the base of this position is determined by the whence parameter).

\param hnd The file descriptor to move the pointer for.

\param offset The offset in bytes from the specified base.

\param whence The base of the pointer move. This should be one of

the \ref seek_modes values.

\return The new position of the file pointer.

*/

off_t fs_seek(file_t hnd, off_t offset, int whence);

/** \brief Seek to a new position within a file (64-bit offsets).

This function moves the file pointer to the specified position within the

file (the base of this position is determined by the whence parameter).

\param hnd The file descriptor to move the pointer for.

\param offset The offset in bytes from the specified base.

\param whence The base of the pointer move. This should be one of

the \ref seek_modes values.

\return The new position of the file pointer.

*/

_off64_t fs_seek64(file_t hnd, _off64_t offset, int whence);

/** \brief Retrieve the position of the pointer within a file.

This function retrieves the current location of the file pointer within an

opened file. This is an offset in bytes from the start of the file.

\param hnd The file descriptor to retrieve the pointer from.

\return The offset within the file for the pointer.

*/

off_t fs_tell(file_t hnd);

/** \brief Retrieve the position of the 64-bit pointer within a file.

This function retrieves the current location of the file pointer within an

opened file. This is an offset in bytes from the start of the file.

\param hnd The file descriptor to retrieve the pointer from.

\return The offset within the file for the pointer.

*/

_off64_t fs_tell64(file_t hnd);

/** \brief Retrieve the length of an opened file.

This file retrieves the length of the file associated with the given file

descriptor.

\param hnd The file descriptor to retrieve the size from.

\return The length of the file on success, -1 on failure.

*/

size_t fs_total(file_t hnd);

/** \brief Retrieve the length of an opened file as a 64-bit integer.

This file retrieves the length of the file associated with the given file

descriptor.

\param hnd The file descriptor to retrieve the size from.

\return The length of the file on success, -1 on failure.

*/

uint64 fs_total64(file_t hnd);

/** \brief Read an entry from an opened directory.

This function reads the next entry from the directory specified by the given

file descriptor.

\param hnd The opened directory's file descriptor.

\return The next entry, or NULL on failure.

*/

dirent_t *fs_readdir(file_t hnd);

/** \brief Execute a device-specific command on a file descriptor.

The types and formats of the commands are device/filesystem specific, and

are not documented here. Each filesystem may define any commands that are

specific to it with its implementation of this function.

\param hnd The file descriptor to operate on.

\param data The command to send.

\param size The size of the command, in bytes.

\return -1 on failure.

*/

int fs_ioctl(file_t hnd, void *data, size_t size);

/** \brief Rename the specified file to the given filename.

This function renames the file specified by the first argument to the second

argument. The two paths should be on the same filesystem.

\param fn1 The existing file to rename.

\param fn2 The new filename to rename to.

\return 0 on success, -1 on failure.

*/

int fs_rename(const char *fn1, const char *fn2);

/** \brief Delete the specified file.

This function deletes the specified file from the filesystem. This should

only be used for files, not for directories. For directories, use fs_rmdir()

instead of this function.

\param fn The path to remove.

\return 0 on success, -1 on failure.

*/

int fs_unlink(const char *fn);

/** \brief Change the current working directory of the current thread.

This function changes the current working directory for the current thread.

Any relative paths passed into file-related functions will be relative to

the path that is changed to.

\param fn The path to set as the current working directory.

\return 0 on success, -1 on failure.

*/

int fs_chdir(const char *fn);

/** \brief Memory-map a previously opened file.

This file "maps" the opened file into memory, reading the whole file into a

buffer, and returning that buffer. The returned buffer should not be freed,

as it will be freed when the file is closed. Bytes written into the buffer,

up to the original length of the file, will be written back to the file when

it is closed, assuming that the file is opened for writing.

\param hnd The descriptor to memory map.

\return The memory mapped buffer, or NULL on failure.

\note Some of the filesystems in KallistiOS do not support

this operation. If you attempt to use this function

on a filesystem that does not support it, the

function will return NULL and set errno to EINVAL.

*/

void *fs_mmap(file_t hnd);

/** \brief Perform an I/O completion on the given file descriptor.

This function is used with asynchronous I/O to perform an I/O completion on

the given file descriptor.

\param fd The descriptor to complete I/O on.

\param rv A buffer to store the size of the I/O in.

\return 0 on success, -1 on failure.

\note Most of the filesystems in KallistiOS do not support

this operation. If you attempt to use this function

on a filesystem that does not support it, the

function will return -1 and set errno to EINVAL.

*/

int fs_complete(file_t fd, ssize_t *rv);

/** \brief Create a directory.

This function creates the specified directory, if possible.

\param fn The path of the directory to create.

\return 0 on success, -1 on failure.

*/

int fs_mkdir(const char *fn);

/** \brief Remove a directory by name.

This function removes the specified directory. The directory shall only be

removed if it is empty.

\param fn The path of the directory to remove.

\return 0 on success, -1 on failure.

*/

int fs_rmdir(const char *fn);

/** \brief Create a hard link.

This function implements the POSIX function link(), which creates a hard

link for an existing file.

\param path1 An existing file to create a new link to.

\param path2 The pathname of the new link to be created.

\return 0 on success, -1 on failure.

\note Most filesystems in KallistiOS do not support hard

links. If you call this function on a filesystem

that does not support hard links, the function will

return -1 and set errno to EMLINK.

*/

int fs_link(const char *path1, const char *path2);

/** \brief Create a symbolic link.

This function implements the POSIX function symlink(), which creates a

symbolic link on the filesystem. Symbolic links are not required to point to

an existing file (per POSIX) and may result in circular links if care is not

taken. For now, symbolic links cannot cross filesystem boundaries in KOS.

\param path1 The content of the link (i.e, what to point at).

\param path2 The pathname of the new link to be created.

\return 0 on success, -1 on failure.

\note Most filesystems in KallistiOS do not support

symbolic links. Filesystems that do not support

symlinks will simply set errno to ENOSYS and return

-1.

*/

int fs_symlink(const char *path1, const char *path2);

/** \brief Read the value of a symbolic link.

This function implements the POSIX function readlink(), which simply reads

the value of the symbolic link at the end of a path. This does not resolve

any internal links and it does not canonicalize the path either.

\param path The symbolic link to read.

\param buf The buffer to place the link's contents in.

\param bufsize The number of bytes allocated to buf.

\return -1 on failure, the number of bytes placed into buf

on success. If the return value is equal to bufsize,

you may not have the whole link -- provide a larger

buffer and try again.

\note Most filesystems in KallistiOS do not support

symbolic links. Filesystems that do not support

symlinks will simply set errno to ENOSYS and return

-1.

*/

ssize_t fs_readlink(const char *path, char *buf, size_t bufsize);

/** \brief Retrieve information about the specified path.

This function retrieves status information on the given path. This function

now returns the normal POSIX-style struct stat, rather than the old KOS

stat_t structure. In addition, you can specify whether or not this function

should resolve symbolic links on filesystems that support symlinks.

\param path The path to retrieve information about.

\param buf The buffer to store stat information in.

\param flag Specifies whether or not to resolve a symbolic link.

If you don't want to resolve any symbolic links at

the end of the path, pass AT_SYMLINK_NOFOLLOW,

otherwise pass 0.

\return 0 on success, -1 on failure.

*/

int fs_stat(const char *path, struct stat *buf, int flag);

/** \brief Rewind a directory to the start.

This function rewinds the position of a directory stream to the beginning of

the directory.

\param hnd The opened directory's file descriptor.

\return 0 on success, -1 on failure.

\note Some filesystems may not support this function. If a

filesystem doesn't support it, errno will be set to

ENOSYS and -1 will be returned.

*/

int fs_rewinddir(file_t hnd);

/** \brief Retrieve information about an opened file.

This function retrieves status information on the given file descriptor,

which must correspond to an already opened file.

\param hnd The file descriptor to retrieve information about.

\param buf The buffer to store stat information in.

\return 0 on success, -1 on failure.

\note Some filesystems may not support this function. If a

filesystem doesn't support it, errno will be set to

ENOSYS and -1 will be returned.

*/

int fs_fstat(file_t hnd, struct stat *buf);

/** \brief Duplicate a file descriptor.

This function duplicates the specified file descriptor, returning a new file

descriptor that can be used to access the file. This is equivalent to the

standard POSIX function dup().

\param oldfd The old file descriptor to duplicate.

\return The new file descriptor on success, -1 on failure.

*/

file_t fs_dup(file_t oldfd);

/** \brief Duplicate a file descriptor onto the specified descriptor.

This function duplicates the specified file descriptor onto the other file

descriptor provided. If the newfd parameter represents an open file, that

file will be closed before the old descriptor is duplicated onto it. This is

equivalent to the standard POSIX function dup2().

\param oldfd The old file descriptor to duplicate.

\param newfd The descriptor to copy into.

\return The new file descriptor on success, -1 on failure.

*/

file_t fs_dup2(file_t oldfd, file_t newfd);

/** \brief Get the current working directory of the running thread.

\return The current working directory.

*/

const char *fs_getwd();

/* Couple of util functions */

/** \brief Copy a file.

This function copies the file at src to dst on the filesystem.

\param src The filename to copy from.

\param dst The filename to copy to.

\return The number of bytes copied successfully.

*/

ssize_t fs_copy(const char *src, const char *dst);

/** \brief Open and read a whole file into RAM.

This function opens the specified file, reads it into memory (allocating the

necessary space with malloc), and closes the file. The caller is responsible

for freeing the memory when they are done with it.

\param src The filename to open and read.

\param out_ptr A pointer to the buffer on success, NULL otherwise.

\return The size of the file on success, -1 otherwise.

*/

ssize_t fs_load(const char *src, void **out_ptr);

/* Call this function to create a new pty. The name of the pty is written

into the user-provided buffer (if non-NULL) and two open file descriptors

pointing to the two ends of the pty are returned. */

int fs_pty_create(char * buffer, int maxbuflen, file_t * master_out, file_t * slave_out);

/* Sound effect handle type */

typedef uint32 sfxhnd_t;

#define SFXHND_INVALID 0

/* Load a sound effect from a WAV file and return a handle to it */

sfxhnd_t snd_sfx_load(const char *fn);

/* Unload a single sample */

void snd_sfx_unload(sfxhnd_t idx);

/* Unload all loaded samples and free their SPU RAM */

void snd_sfx_unload_all();

/* Play a sound effect with the given volume and panning; if the sound

effect is in stereo, the panning is ignored. Returns the used channel

ID (or the left channel, if stereo). */

int snd_sfx_play(sfxhnd_t idx, int vol, int pan);

/* Stop all playing sound effects. Doesn't stop channels 0 or 1, which

are assumed to be for streaming. */

void snd_sfx_stop_all();

/* Waits for the sound FIFO to empty */

//void spu_write_wait();

/* memcpy and memset designed for sound RAM; for addresses, don't

bother to include the 0xa0800000 offset that is implied. 'length'

must be a multiple of 4, but if it is not it will be rounded up. */

void spu_memload(uint32 to, void *from, int length);

void spu_memread(void *to, uint32 from, int length);

void spu_memset(uint32 to, uint32 what, int length);

/* Enable/disable the SPU; note that disable implies reset of the

ARM CPU core. */

void spu_enable();

void spu_disable();

/* Set CDDA volume: values are 0-15 */

void spu_cdda_volume(int left_volume, int right_volume);

/* Set CDDA panning: values are 0-31, 16=center */

void spu_cdda_pan(int left_pan, int right_pan);

/* Set master volume (0..15) and mono/stereo settings */

void spu_master_mixer(int volume, int stereo);

/* clears n bytes at dest, dest must be 32-byte aligned */

void sq_clr(void *dest, int n);

/* copies n bytes from src to dest, dest must be 32-byte aligned */

void * sq_cpy(void *dest, void *src, int n);

/* fills n bytes at s with byte c, s must be 32-byte aligned */

void * sq_set(void *s, uint32 c, int n);

/* fills n bytes at s with short c, s must be 32-byte aligned */

void * sq_set16(void *s, uint32 c, int n);

/* fills n bytes at s with int c, s must be 32-byte aligned */

void * sq_set32(void *s, uint32 c, int n);

//-----------------------------------------------------------------------------

#define CT_ANY -1 // <-- Used ONLY internally with vid_mode

#define CT_VGA 0

#define CT_RGB 2

#define CT_COMPOSITE 3

//-----------------------------------------------------------------------------

#define PM_RGB555 0

#define PM_RGB565 1

#define PM_RGB888 3

//-----------------------------------------------------------------------------

// More specific modes (and actual indeces into the mode table)

enum {

DM_INVALID = 0,

// Valid modes below

DM_320x240_VGA = 1,

DM_320x240_NTSC,

DM_640x480_VGA,

DM_640x480_NTSC_IL,

DM_800x608_VGA,

DM_640x480_PAL_IL,

DM_256x256_PAL_IL,

DM_768x480_NTSC_IL,

DM_768x576_PAL_IL,

DM_768x480_PAL_IL,

DM_320x240_PAL,

// The below is only for counting..

DM_SENTINEL,

DM_MODE_COUNT

};

int vid_check_cable();

void vid_set_start(uint32 base);

void vid_flip(int fb);

void vid_border_color(int r, int g, int b);

void vid_clear(int r, int g, int b);

// void vid_empty();

void vid_waitvbl();

void vid_set_mode(int dm, int pm);

/**

\file Implements wrappers for the BIOS flashrom syscalls, and some

utilities to make it easier to use the flashrom info. Note that

because the flash writing can be such a dangerous thing potentially

(I haven't deleted my flash to see what happens, but given the

info stored here it sounds like a Bad Idea(tm)) the syscalls for

the WRITE and DELETE operations are not enabled by default. If you

are 100% sure you really want to be writing to the flash and you

know what you're doing, then you can edit flashrom.c and re-enable

them there. */

/**

An enumeration of partitions available in the flashrom. */

#define FLASHROM_PT_SYSTEM 0 /*< Factory settings (read-only, 8K) */

#define FLASHROM_PT_RESERVED 1 /*< reserved (all 0s, 8K) */

#define FLASHROM_PT_BLOCK_1 2 /*< Block allocated (16K) */

#define FLASHROM_PT_SETTINGS 3 /*< Game settings (block allocated, 32K) */

#define FLASHROM_PT_BLOCK_2 4 /*< Block allocated (64K) */

/**

Implements the FLASHROM_INFO syscall; given a partition ID,

return two ints specifying the beginning and the size of

the partition (respectively) inside the flashrom. Returns zero

if successful, -1 otherwise. */

int flashrom_info(int part, int * start_out, int * size_out);

/**

Implements the FLASHROM_READ syscall; given a flashrom offset,

an output buffer, and a count, this reads data from the

flashrom. Returns the number of bytes read if successful,

or -1 otherwise. */

int flashrom_read(int offset, void * buffer_out, int bytes);

/**

Implements the FLASHROM_WRITE syscall; given a flashrom offset,

an input buffer, and a count, this writes data to the flashrom.

Returns the number of bytes written if successful, -1 otherwise.

NOTE: It is not possible to write ones to the flashrom over zeros.

If you want to do this, you must save the old data in the flashrom,

delete it out, and save the new data back. */

int flashrom_write(int offset, void * buffer, int bytes);

/**

Implements the FLASHROM_DELETE syscall; given a partition offset,

that entire partition of the flashrom will be deleted and all data

will be reset to FFs. Returns zero if successful, -1 on failure. */

int flashrom_delete(int offset);

/* Medium-level functions */

/**

Returns a numbered logical block from the requested partition. The newest

data is returned. 'buffer_out' must have enough room for 60 bytes of

data. */

int flashrom_get_block(int partid, int blockid, uint8 * buffer_out);

/* Higher level functions */

/**

Language settings possible in the BIOS menu. These will be returned

from flashrom_get_language(). */

#define FLASHROM_LANG_JAPANESE 0

#define FLASHROM_LANG_ENGLISH 1

#define FLASHROM_LANG_GERMAN 2

#define FLASHROM_LANG_FRENCH 3

#define FLASHROM_LANG_SPANISH 4

#define FLASHROM_LANG_ITALIAN 5

/**

This struct will be filled by calling the flashrom_get_syscfg call

below. */

typedef struct flashrom_syscfg {

int language; /*< Language setting (see defines above) */

int audio; /*< 0 == mono, 1 == stereo */

int autostart; /*< 0 == off, 1 == on */

} flashrom_syscfg_t;

/**

Retrieves the current syscfg settings and fills them into the struct

passed in to us. */

int flashrom_get_syscfg(flashrom_syscfg_t * out);

/**

Region settings possible in the system flash (partition 0). */

#define FLASHROM_REGION_UNKNOWN 0

#define FLASHROM_REGION_JAPAN 1

#define FLASHROM_REGION_US 2

#define FLASHROM_REGION_EUROPE 3

/**

Retrieves the console's region code. This is still somewhat

experimental, it may not function 100% on all DCs. Returns

one of the codes above or -1 on error. */

int flashrom_get_region();

/** \brief Set serial parameters.

\param baud The bitrate to set.

\param fifo 1 to enable FIFO mode.

*/

void scif_set_parameters(int baud, int fifo);

// The rest of these are the standard dbgio interface.

/** \brief Enable or disable SCIF IRQ usage.

\param on 1 to enable IRQ usage, 0 for polled I/O.

\retval 0 On success (no error conditions defined).

*/

int scif_set_irq_usage(int on);

/** \brief Is the SCIF port detected? Of course it is!

\return 1

*/

int scif_detected();

/** \brief Initialize the SCIF port.

This function initializes the SCIF port to a sane state. If dcload-serial is

in use, this is effectively a no-op.

\retval 0 On success (no error conditions defined).

*/

int scif_init();

/** \brief Shutdown the SCIF port.

This function disables SCIF IRQs, if they were enabled and cleans up.

\retval 0 On success (no error conditions defined).

*/

int scif_shutdown();

/** \brief Read a single character from the SCIF port.

\return The character read if one is available, otherwise -1

and errno is set to EAGAIN.

*/

int scif_read();

/** \brief Write a single character to the SCIF port.

\param c The character to write (only the low 8-bits are

written).

\retval 1 On success.

\retval -1 If the SCIF port is disabled (errno set to EIO).

*/

int scif_write(int c);

/** \brief Flush any FIFO'd bytes out of the buffer.

This function sends any bytes that have been queued up for transmission but

have not left yet in FIFO mode.

\retval 0 On success.

\retval -1 If the SCIF port is disabled (errno set to EIO).

*/

int scif_flush();

/** \brief Write a whole buffer of data to the SCIF port.

This function writes a whole buffer of data to the SCIF port, optionally

making all newlines into carriage return + newline pairs.

\param data The buffer to write.

\param len The length of the buffer, in bytes.

\param xlat If set to 1, all newlines will be written as CRLF.

\return The number of bytes written on success, -1 on error.

*/

int scif_write_buffer(const uint8 *data, int len, int xlat);

/** \brief Read a buffer of data from the SCIF port.

This function reads a whole buffer of data from the SCIF port, blocking

until it has been filled.

\param data The buffer to read into.

\param len The number of bytes to read.

\return The number of bytes read on success, -1 on error.

*/

int scif_read_buffer(uint8 *data, int len);

/* GD-ROM */

int cdrom_spin_down();

/* Ends C function definitions when using C++ */

} /* end tolua module DS */

/* Some code to be included in the generated .c file */