Skip to content

vector.rst

Latest commit

 

History

History
35 lines (23 loc) · 1008 Bytes

vector.rst

File metadata and controls

35 lines (23 loc) · 1008 Bytes

Vector

This interface adds support for CAN controllers by Vector.

By default this library uses the channel configuration for CANalyzer. To use a different application, open Vector Hardware Config program and create a new application and assign the channels you may want to use. Specify the application name as app_name='Your app name' when constructing the bus or in a config file.

Channel should be given as a list of channels starting at 0.

Here is an example configuration file connecting to CAN 1 and CAN 2 for an application named "python-can":

[default]
interface = vector
channel = 0, 1
app_name = python-can

If you are using Python 2.7 it is recommended to install pywin32, otherwise a slow and CPU intensive polling will be used when waiting for new messages.

Bus

.. autoclass:: can.interfaces.vector.VectorBus


.. autoexception:: can.interfaces.vector.VectorError