#! /usr/bin/env python3 # # Demonstrates how to enable the pull up or pull down resistors on # the Pi's GPIO pins. # from quick2wire.gpio import pins, In, PullUp, PullDown with pins.pin(0, In) as pin: print("Pull up/down is unspecified, pin is now", pin.value) with pins.pin(0, In, pull=PullUp) as pin: print("Pin is set with pull up, pin in is now", pin.value) with pins.pin(0, In, pull=PullDown) as pin: print("Pin is set with pull down, pin is now", pin.value)