## @file MdeModulePkg.dec

#

# This package provides the modules that conform to UEFI/PI Industry standards.

# It also provides the definitions(including PPIs/PROTOCOLs/GUIDs and library classes)

# and libraries instances, which are used for those modules.

#

# Copyright (c) 2007 - 2016, Intel Corporation. All rights reserved.<BR>

# Copyright (c) 2016, Linaro Ltd. All rights reserved.<BR>

# (C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>

# This program and the accompanying materials are licensed and made available under

# the terms and conditions of the BSD License that accompanies this distribution.

# The full text of the license may be found at

# http://opensource.org/licenses/bsd-license.php.

#

# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,

# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

#

##

[Defines]

DEC_SPECIFICATION = 0x00010005

PACKAGE_NAME = MdeModulePkg

PACKAGE_UNI_FILE = MdeModulePkg.uni

PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288

PACKAGE_VERSION = 0.96

[Includes]

Include

[LibraryClasses]

## @libraryclass IpIo layer upon EFI IP4 Protocol.

# This library is only intended to be used by UEFI network stack modules.

IpIoLib|Include/Library/IpIoLib.h

## @libraryclass Basic function for UEFI network stack.

# This library is only intended to be used by UEFI network stack modules.

NetLib|Include/Library/NetLib.h

## @libraryclass The helper routines to access UDP service.

# This library is only intended to be used by UEFI network stack modules.

UdpIoLib|Include/Library/UdpIoLib.h

## @libraryclass The helper routines to access TCP service.

# This library is only intended to be used by UEFI network stack modules.

TcpIoLib|Include/Library/TcpIoLib.h

## @libraryclass The helper routines to access HTTP service.

# This library is only intended to be used by UEFI network stack modules.

HttpLib|Include/Library/HttpLib.h

## @libraryclass Defines a set of methods to reset whole system.

ResetSystemLib|Include/Library/ResetSystemLib.h

## @libraryclass Defines a set of methods related do S3 mode.

# This library class is no longer used and modules using this library should

# directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.

S3Lib|Include/Library/S3Lib.h

## @libraryclass Defines a set of methods related recovery mode.

# This library class is no longer used and modules using this library should

# directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification.

RecoveryLib|Include/Library/RecoveryLib.h

## @libraryclass Provides HII related functions.

HiiLib|Include/Library/HiiLib.h

## @libraryclass Defines a set of interfaces on how to process capusle image update.

CapsuleLib|Include/Library/CapsuleLib.h

## @libraryclass Library for Deferred Procedure Calls.

DpcLib|Include/Library/DpcLib.h

## @libraryclass Provides global variables that are pointers

# to the UEFI HII related protocols.

#

UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h

## @libraryclass Provides a set of interfaces to abstract the policy of security measurement.

#

SecurityManagementLib|Include/Library/SecurityManagementLib.h

## @libraryclass OEM status code libary is used to report status code to OEM device.

#

OemHookStatusCodeLib|Include/Library/OemHookStatusCodeLib.h

## @libraryclass Debug Agent is used to provide soft debug capability.

#

DebugAgentLib|Include/Library/DebugAgentLib.h

## @libraryclass Provide platform specific hooks.

#

PlatformHookLib|Include/Library/PlatformHookLib.h

## @libraryclass Provide platform specific hooks for SMM core.

#

SmmCorePlatformHookLib|Include/Library/SmmCorePlatformHookLib.h

## @libraryclass Provide capability to maintain the data integrity cross S3 phase.

#

LockBoxLib|Include/Library/LockBoxLib.h

## @libraryclass Provide the CPU exception handler.

#

CpuExceptionHandlerLib|Include/Library/CpuExceptionHandlerLib.h

## @libraryclass Provides platform specific display interface.

#

CustomizedDisplayLib|Include/Library/CustomizedDisplayLib.h

## @libraryclass Provides sorting functions

SortLib|Include/Library/SortLib.h

## @libraryclass Provides core boot manager functions

UefiBootManagerLib|Include/Library/UefiBootManagerLib.h

## @libraryclass Provides core boot manager functions

PlatformBootManagerLib|Include/Library/PlatformBootManagerLib.h

## @libraryclass Provides common interfaces about TPM measurement for other modules.

#

TpmMeasurementLib|Include/Library/TpmMeasurementLib.h

## @libraryclass Provides authenticated variable services.

#

AuthVariableLib|Include/Library/AuthVariableLib.h

## @libraryclass Provides variable check services and database management.

#

VarCheckLib|Include/Library/VarCheckLib.h

## @libraryclass Provides services to get variable error flag and do platform variable cleanup.

#

PlatformVarCleanupLib|Include/Library/PlatformVarCleanupLib.h

## @libraryclass Provides services to get do the file explorer.

#

FileExplorerLib|Include/Library/FileExplorerLib.h

## @libraryclass Provides image decoding service.

#

ImageDecoderLib|Include/Library/ImageDecoderLib.h

## @libraryclass Provides interfaces about logo display.

#

BootLogoLib|Include/Library/BootLogoLib.h

## @libraryclass Provides interfaces about Ipmi submit generic commond.

#

IpmiLib|Include/Library/IpmiLib.h

## @libraryclass Provides interfaces for platform to return root bridge information to PciHostBridgeDxe driver.

#

PciHostBridgeLib|Include/Library/PciHostBridgeLib.h

[Guids]

## MdeModule package token space guid

# Include/Guid/MdeModulePkgTokenSpace.h

gEfiMdeModulePkgTokenSpaceGuid = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}

## Hob guid for Pcd DataBase

# Include/Guid/PcdDataBaseHobGuid.h

gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}

## Guid for PCD DataBase signature.

# Include/Guid/PcdDataBaseSignatureGuid.h

gPcdDataBaseSignatureGuid = { 0x3c7d193c, 0x682c, 0x4c14, { 0xa6, 0x8f, 0x55, 0x2d, 0xea, 0x4f, 0x43, 0x7e }}

## Guid for EDKII implementation GUIDed opcodes

# Include/Guid/MdeModuleHii.h

gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}

## Guid for Framework vfr GUIDed opcodes.

# Include/Guid/MdeModuleHii.h

gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}

## Guid to specify the System Non Volatile FV

# Include/Guid/SystemNvDataGuid.h

gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}

## GUID used as the signature of FTW working block header.

# Include/Guid/SystemNvDataGuid.h

gEdkiiWorkingBlockSignatureGuid = { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }}

## GUID used to build FTW last write data hob and install PPI to inform the check for FTW last write data has been done.

# Include/Guid/FaultTolerantWrite.h

gEdkiiFaultTolerantWriteGuid = { 0x1d3e9cb8, 0x43af, 0x490b, { 0x83, 0xa, 0x35, 0x16, 0xaa, 0x53, 0x20, 0x47 }}

## Guid specify the device is the console out device.

# Include/Guid/ConsoleOutDevice.h

gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}

## Guid specify the device is the console in device.

# Include/Guid/ConsoleInDevice.h

gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}

## Hob and Variable guid specify the platform memory type information.

# Include/Guid/MemoryTypeInformation.h

gEfiMemoryTypeInformationGuid = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}

## Capsule update hob and variable guid

# Include/Guid/CapsuleVendor.h

gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}

## Guid specifiy the device is the StdErr device.

# Include/Guid/StandardErrorDevice.h

gEfiStandardErrorDeviceGuid = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}

## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.

# Include/Guid/VariableFormat.h

gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}

## Guid acted as the authenticated variable store header's signature, and to specify the variable list entries put in the EFI system table.

# Include/Guid/AuthenticatedVariableFormat.h

gEfiAuthenticatedVariableGuid = { 0xaaf32c78, 0x947b, 0x439a, { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 } }

# Include/Guid/VariableIndexTable.h

gEfiVariableIndexTableGuid = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}

## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.

# Include/Guid/SmmVariableCommon.h

gSmmVariableWriteGuid = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}

## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID

# Include/Guid/Performance.h

gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 } }

gSmmPerformanceProtocolGuid = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa, 0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }

gPerformanceExProtocolGuid = { 0x1ea81bec, 0xf01a, 0x4d98, { 0xa2, 0x1, 0x4a, 0x61, 0xce, 0x2f, 0xc0, 0x22 } }

gSmmPerformanceExProtocolGuid = { 0x931fc048, 0xc71d, 0x4455, { 0x89, 0x30, 0x47, 0x6, 0x30, 0xe3, 0xe, 0xe5 } }

## Guid is defined for CRC32 encapsulation scheme.

# Include/Guid/Crc32GuidedSectionExtraction.h

gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }

## Include/Guid/NicIp4ConfigNvData.h

gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}

## Include/Guid/StatusCodeCallbackGuid.h

gStatusCodeCallbackGuid = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}

## GUID identifies status code records HOB that originate from the PEI status code

# Include/Guid/MemoryStatusCodeRecord.h

gMemoryStatusCodeRecordGuid = { 0x060CC026, 0x4C0D, 0x4DDA, { 0x8F, 0x41, 0x59, 0x5F, 0xEF, 0x00, 0xA5, 0x02 }}

## GUID used to pass DEBUG() macro information through the Status Code Protocol and Status Code PPI

# Include/Guid/StatusCodeDataTypeDebug.h

gEfiStatusCodeDataTypeDebugGuid = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}

## A configuration Table Guid for Load module at fixed address

# Include/Guid/LoadModuleAtFixedAddress.h

gLoadFixedAddressConfigurationTableGuid = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }

## GUID used to store the global debug mask value into an EFI Variable

# Include/Guid/DebugMask.h

gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }

## Event for the DXE Core to signal idle events

# Include/Guid/EventIdle.h

gIdleLoopEventGuid = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } }

## Include/Guid/RecoveryDevice.h

gRecoveryOnFatUsbDiskGuid = { 0x0FFBCE19, 0x324C, 0x4690, { 0xA0, 0x09, 0x98, 0xC6, 0xAE, 0x2E, 0xB1, 0x86 }}

## Include/Guid/RecoveryDevice.h

gRecoveryOnFatIdeDiskGuid = { 0xB38573B6, 0x6200, 0x4AC5, { 0xB5, 0x1D, 0x82, 0xE6, 0x59, 0x38, 0xD7, 0x83 }}

## Include/Guid/RecoveryDevice.h

gRecoveryOnFatFloppyDiskGuid = { 0x2E3D2E75, 0x9B2E, 0x412D, { 0xB4, 0xB1, 0x70, 0x41, 0x6B, 0x87, 0x00, 0xFF }}

## Include/Guid/RecoveryDevice.h

gRecoveryOnDataCdGuid = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }}

## Include/Guid/SmmLockBox.h

gEfiSmmLockBoxCommunicationGuid = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }}

## Include/Guid/AcpiS3Context.h

gEfiAcpiVariableGuid = { 0xAF9FFD67, 0xEC10, 0x488A, { 0x9D, 0xFC, 0x6C, 0xBF, 0x5E, 0xE2, 0x2C, 0x2E }}

## Include/Guid/AcpiS3Context.h

gEfiAcpiS3ContextGuid = { 0xef98d3a, 0x3e33, 0x497a, { 0xa4, 0x1, 0x77, 0xbe, 0x3e, 0xb7, 0x4f, 0x38 }}

## Include/Guid/BootScriptExecutorVariable.h

gEfiBootScriptExecutorVariableGuid = { 0x3079818c, 0x46d4, 0x4a73, { 0xae, 0xf3, 0xe3, 0xe4, 0x6c, 0xf1, 0xee, 0xdb }}

gEfiBootScriptExecutorContextGuid = { 0x79cb58c4, 0xac51, 0x442f, { 0xaf, 0xd7, 0x98, 0xe4, 0x7d, 0x2e, 0x99, 0x8 }}

## Include/Guid/UsbKeyBoardLayout.h

gUsbKeyboardLayoutPackageGuid = { 0xc0f3b43, 0x44de, 0x4907, { 0xb4, 0x78, 0x22, 0x5f, 0x6f, 0x62, 0x89, 0xdc }}

gUsbKeyboardLayoutKeyGuid = { 0x3a4d7a7c, 0x18a, 0x4b42, { 0x81, 0xb3, 0xdc, 0x10, 0xe3, 0xb5, 0x91, 0xbd }}

## Include/Guid/HiiResourceSampleHii.h

gHiiResourceSamleFormSetGuid = { 0x4f4ef7f0, 0xaa29, 0x4ce9, { 0xba, 0x41, 0x64, 0x3e, 0x1, 0x23, 0xa9, 0x9f }}

## Include/Guid/DriverSampleHii.h

gDriverSampleFormSetGuid = { 0xA04A27f4, 0xDF00, 0x4D42, { 0xB5, 0x52, 0x39, 0x51, 0x13, 0x02, 0x11, 0x3D }}

gDriverSampleInventoryGuid = { 0xb3f56470, 0x6141, 0x4621, { 0x8f, 0x19, 0x70, 0x4e, 0x57, 0x7a, 0xa9, 0xe8 }}

gEfiIfrRefreshIdOpGuid = { 0xF5E655D9, 0x02A6, 0x46f2, { 0x9E, 0x76, 0xB8, 0xBE, 0x8E, 0x60, 0xAB, 0x22 }}

## Include/Guid/PlatDriOverrideHii.h

gPlatformOverridesManagerGuid = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}

## Include/Guid/Ip4ConfigHii.h

gNicIp4ConfigNvDataGuid = { 0x9d5b53f, 0xf4b0, 0x4f59, { 0xa0, 0xb1, 0x7b, 0x57, 0xd3, 0x5c, 0xe, 0x5 }}

## Include/Guid/Ip4Config2Hii.h

gIp4Config2NvDataGuid = { 0x9b942747, 0x154e, 0x4d29, { 0xa4, 0x36, 0xbf, 0x71, 0x0, 0xc8, 0xb5, 0x3b }}

## Include/Guid/VlanConfigHii.h

gVlanConfigFormSetGuid = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}

## Include/Guid/Ip4IScsiConfigHii.h

gIp4IScsiConfigGuid = { 0x6456ed61, 0x3579, 0x41c9, { 0x8a, 0x26, 0x0a, 0x0b, 0xd6, 0x2b, 0x78, 0xfc }}

gIScsiCHAPAuthInfoGuid = { 0x786ec0ac, 0x65ae, 0x4d1b, { 0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97 }}

## Include/Guid/ZeroGuid.h

gZeroGuid = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}

## Include/Guid/MtcVendor.h

gMtcVendorGuid = { 0xeb704011, 0x1402, 0x11d3, { 0x8e, 0x77, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b }}

## Guid for Firmware Performance Data Table (FPDT) implementation.

# Include/Guid/FirmwarePerformance.h

gEfiFirmwarePerformanceGuid = { 0xc095791a, 0x3001, 0x47b2, { 0x80, 0xc9, 0xea, 0xc7, 0x31, 0x9f, 0x2f, 0xa4 }}

gFirmwarePerformanceS3PointerGuid = { 0xdc65adc, 0xa973, 0x4130, { 0x8d, 0xf0, 0x2a, 0xdb, 0xeb, 0x9e, 0x4a, 0x31 }}

## Include/Guid/ExitBootServiceFailed.h

gEventExitBootServicesFailedGuid = { 0x4f6c5507, 0x232f, 0x4787, { 0xb9, 0x5e, 0x72, 0xf8, 0x62, 0x49, 0xc, 0xb1 } }

## Include/Guid/ConnectConInEvent.h

gConnectConInEventGuid = { 0xdb4e8151, 0x57ed, 0x4bed, { 0x88, 0x33, 0x67, 0x51, 0xb5, 0xd1, 0xa8, 0xd7 }}

## Include/Guid/StatusCodeDataTypeVariable.h

gEdkiiStatusCodeDataTypeVariableGuid = { 0xf6ee6dbb, 0xd67f, 0x4ea0, { 0x8b, 0x96, 0x6a, 0x71, 0xb1, 0x9d, 0x84, 0xad }}

## Include/Guid/MemoryProfile.h

gEdkiiMemoryProfileGuid = { 0x821c9a09, 0x541a, 0x40f6, { 0x9f, 0x43, 0xa, 0xd1, 0x93, 0xa1, 0x2c, 0xfe }}

## Include/Protocol/VarErrorFlag.h

gEdkiiVarErrorFlagGuid = { 0x4b37fe8, 0xf6ae, 0x480b, { 0xbd, 0xd5, 0x37, 0xd9, 0x8c, 0x5e, 0x89, 0xaa } }

## GUID indicates the LZMA custom compress/decompress algorithm.

# Include/Guid/LzmaDecompress.h

gLzmaCustomDecompressGuid = { 0xEE4E5898, 0x3914, 0x4259, { 0x9D, 0x6E, 0xDC, 0x7B, 0xD7, 0x94, 0x03, 0xCF }}

gLzmaF86CustomDecompressGuid = { 0xD42AE6BD, 0x1352, 0x4bfb, { 0x90, 0x9A, 0xCA, 0x72, 0xA6, 0xEA, 0xE8, 0x89 }}

## Include/Guid/TtyTerm.h

gEfiTtyTermGuid = { 0x7d916d80, 0x5bb1, 0x458c, {0xa4, 0x8f, 0xe2, 0x5f, 0xdd, 0x51, 0xef, 0x94 }}

## Include/Guid/HiiBootMaintenanceFormset.h

gEfiIfrBootMaintenanceGuid = { 0xb2dedc91, 0xd59f, 0x48d2, { 0x89, 0x8a, 0x12, 0x49, 0xc, 0x74, 0xa4, 0xe0 }}

gEfiIfrFrontPageGuid = { 0xe58809f8, 0xfbc1, 0x48e2, { 0x88, 0x3a, 0xa3, 0x0f, 0xdc, 0x4b, 0x44, 0x1e } }

## Include/Guid/RamDiskHii.h

gRamDiskFormSetGuid = { 0x2a46715f, 0x3581, 0x4a55, { 0x8e, 0x73, 0x2b, 0x76, 0x9a, 0xaa, 0x30, 0xc5 }}

[Ppis]

## Include/Ppi/AtaController.h

gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}

## Include/Ppi/UsbHostController.h

gPeiUsbHostControllerPpiGuid = { 0x652B38A9, 0x77F4, 0x453F, { 0x89, 0xD5, 0xE7, 0xBD, 0xC3, 0x52, 0xFC, 0x53 }}

## Include/Ppi/Usb2HostController.h

gPeiUsb2HostControllerPpiGuid = { 0xfedd6305, 0xe2d7, 0x4ed5, { 0x9f, 0xaa, 0xda, 0x8, 0xe, 0x33, 0x6c, 0x22 }}

## Include/Ppi/UsbController.h

gPeiUsbControllerPpiGuid = { 0x3BC1F6DE, 0x693E, 0x4547, { 0xA3, 0x00, 0x21, 0x82, 0x3C, 0xA4, 0x20, 0xB2 }}

## Include/Ppi/UsbIo.h

gPeiUsbIoPpiGuid = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }}

## Include/Ppi/Capsule.h

gPeiCapsulePpiGuid = { 0x3acf33ee, 0xd892, 0x40f4, { 0xa2, 0xfc, 0x38, 0x54, 0xd2, 0xe1, 0x32, 0x3d }}

## Include/Ppi/SecPerformance.h

gPeiSecPerformancePpiGuid = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }}

## Include/Ppi/SmmCommunication.h

gEfiPeiSmmCommunicationPpiGuid = { 0xae933e1c, 0xcc47, 0x4e38, { 0x8f, 0xe, 0xe2, 0xf6, 0x1d, 0x26, 0x5, 0xdf }}

## Include/Ppi/SmmAccess.h

gPeiSmmAccessPpiGuid = { 0x268f33a9, 0xcccd, 0x48be, { 0x88, 0x17, 0x86, 0x5, 0x3a, 0xc3, 0x2e, 0xd6 }}

## Include/Ppi/SmmControl.h

gPeiSmmControlPpiGuid = { 0x61c68702, 0x4d7e, 0x4f43, { 0x8d, 0xef, 0xa7, 0x43, 0x5, 0xce, 0x74, 0xc5 }}

## Include/Ppi/PostBootScriptTable.h

gPeiPostScriptTablePpiGuid = { 0x88c9d306, 0x900, 0x4eb5, { 0x82, 0x60, 0x3e, 0x2d, 0xbe, 0xda, 0x1f, 0x89}}

## Include/Ppi/SerialPortPei.h

gPeiSerialPortPpiGuid = { 0x490e9d85, 0x8aef, 0x4193, { 0x8e, 0x56, 0xf7, 0x34, 0xa9, 0xff, 0xac, 0x8b}}

## Include/Ppi/UfsHostController.h

gEdkiiPeiUfsHostControllerPpiGuid = { 0xdc54b283, 0x1a77, 0x4cd6, { 0x83, 0xbb, 0xfd, 0xda, 0x46, 0x9a, 0x2e, 0xc6 }}

## Include/Ppi/IpmiPpi.h

gPeiIpmiPpiGuid = { 0xa9731431, 0xd968, 0x4277, { 0xb7, 0x52, 0xa3, 0xa9, 0xa6, 0xae, 0x18, 0x98 }}

## Include/Ppi/SdMmcHostController.h

gEdkiiPeiSdMmcHostControllerPpiGuid = { 0xb30dfeed, 0x947f, 0x4396, { 0xb1, 0x5a, 0xdf, 0xbd, 0xb9, 0x16, 0xdc, 0x24 }}

[Protocols]

## Load File protocol provides capability to load and unload EFI image into memory and execute it.

# Include/Protocol/LoadPe32Image.h

# This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.

# If developer need implement such functionality, they should use BasePeCoffLib.

gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}

## Print protocol defines basic print functions to print the format unicode and ascii string.

# Include/Protocol/Print2.h

gEfiPrint2ProtocolGuid = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }

## This protocol defines the generic memory test interfaces in Dxe phase.

# Include/Protocol/GenericMemoryTest.h

gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}

## Include/Protocol/Dpc.h

gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}

## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.

# Include/Protocol/FaultTolerantWrite.h

gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}

## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.

# Include/Protocol/SmmFaultTolerantWrite.h

gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}

## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.

# Include/Protocol/SwapAddressRange.h

gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}

## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.

# Include/Protocol/SmmSwapAddressRange.h

gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}

## This protocol is intended for use as a means to store data in the EFI SMM environment.

# Include/Protocol/SmmVariableProtocol.h

gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}

## This protocol is intended for use as a means to mark a variable read-only after the event EFI_END_OF_DXE_EVENT_GUID is signaled.

# Include/Protocol/VariableLock.h

gEdkiiVariableLockProtocolGuid = { 0xcd3d0a05, 0x9e24, 0x437c, { 0xa8, 0x91, 0x1e, 0xe0, 0x53, 0xdb, 0x76, 0x38 }}

## Include/Protocol/VarCheck.h

gEdkiiVarCheckProtocolGuid = { 0xaf23b340, 0x97b4, 0x4685, { 0x8d, 0x4f, 0xa3, 0xf2, 0x81, 0x69, 0xb2, 0x1d } }

## Include/Protocol/SmmVarCheck.h

gEdkiiSmmVarCheckProtocolGuid = { 0xb0d8f3c1, 0xb7de, 0x4c11, { 0xbc, 0x89, 0x2f, 0xb5, 0x62, 0xc8, 0xc4, 0x11 } }

## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.

# Include/Protocol/SmmFirmwareVolumeBlock.h

gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}

## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules

# Include/Guid/DebugMask.h

gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }

## Include/Protocol/LockBox.h

gEfiLockBoxProtocolGuid = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }}

## Include/Protocol/FormBrowserEx.h

gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }

## Include/Protocol/EbcVmTest.h

gEfiEbcVmTestProtocolGuid = { 0xAAEACCFD, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } }

## Include/Protocol/EbcSimpleDebugger.h

gEfiEbcSimpleDebuggerProtocolGuid = { 0x2a72d11e, 0x7376, 0x40f6, { 0x9c, 0x68, 0x23, 0xfa, 0x2f, 0xe3, 0x63, 0xf1 } }

## Include/Protocol/BootLogo.h

gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } }

## Include/Protocol/DisplayProtocol.h

gEdkiiFormDisplayEngineProtocolGuid = { 0x9bbe29e9, 0xfda1, 0x41ec, { 0xad, 0x52, 0x45, 0x22, 0x13, 0x74, 0x2d, 0x2e } }

## Include/Protocol/FormBrowserEx2.h

gEdkiiFormBrowserEx2ProtocolGuid = { 0xa770c357, 0xb693, 0x4e6d, { 0xa6, 0xcf, 0xd2, 0x1c, 0x72, 0x8e, 0x55, 0xb } }

## Include/Protocol/UfsHostController.h

gEdkiiUfsHostControllerProtocolGuid = { 0xebc01af5, 0x7a9, 0x489e, { 0xb7, 0xce, 0xdc, 0x8, 0x9e, 0x45, 0x9b, 0x2f } }

## Include/Protocol/EsrtManagement.h

gEsrtManagementProtocolGuid = { 0xa340c064, 0x723c, 0x4a9c, { 0xa4, 0xdd, 0xd5, 0xb4, 0x7a, 0x26, 0xfb, 0xb0 }}

## Include/Protocol/SmmExitBootServices.h

gEdkiiSmmExitBootServicesProtocolGuid = { 0x296eb418, 0xc4c8, 0x4e05, { 0xab, 0x59, 0x39, 0xe8, 0xaf, 0x56, 0xf0, 0xa } }

## Include/Protocol/SmmLegacyBoot.h

gEdkiiSmmLegacyBootProtocolGuid = { 0x85a8ab57, 0x644, 0x4110, { 0x85, 0xf, 0x98, 0x13, 0x22, 0x4, 0x70, 0x70 } }

## Include/Protocol/SmmReadyToBoot.h

gEdkiiSmmReadyToBootProtocolGuid = { 0x6e057ecf, 0xfa99, 0x4f39, { 0x95, 0xbc, 0x59, 0xf9, 0x92, 0x1d, 0x17, 0xe4 } }

## Include/Protocol/PlatformLogo.h

gEdkiiPlatformLogoProtocolGuid = { 0x9b517978, 0xeba1, 0x44e7, { 0xba, 0x65, 0x7c, 0x2c, 0xd0, 0x8b, 0xf8, 0xe9 } }

## Include/Protocol/FileExplorer.h

gEfiFileExplorerProtocolGuid = { 0x2C03C536, 0x4594, 0x4515, { 0x9E, 0x7A, 0xD3, 0xD2, 0x04, 0xFE, 0x13, 0x63 } }

## Include/Protocol/IpmiProtocol.h

gIpmiProtocolGuid = { 0xdbc6381f, 0x5554, 0x4d14, { 0x8f, 0xfd, 0x76, 0xd7, 0x87, 0xb8, 0xac, 0xbf } }

gSmmIpmiProtocolGuid = { 0x5169af60, 0x8c5a, 0x4243, { 0xb3, 0xe9, 0x56, 0xc5, 0x6d, 0x18, 0xee, 0x26 } }

#

# [Error.gEfiMdeModulePkgTokenSpaceGuid]

# 0x80000001 | Invalid value provided.

# 0x80000002 | Reserved bits must be set to zero.

# 0x80000003 | Incorrect progress code provided.

# 0x80000004 | Invalid foreground color specified.

# 0x80000005 | Invalid background color specified.

# 0x80000006 | Incorrect error code provided.

#

[PcdsFeatureFlag]

## Indicates if the platform can support update capsule across a system reset.<BR><BR>

# TRUE - Supports update capsule across a system reset.<BR>

# FALSE - Does not support update capsule across a system reset.<BR>

# @Prompt Enable update capsule across a system reset.

gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d

## Indicates if all PCD PPI services will be enabled.<BR><BR>

# TRUE - All PCD PPI services will be produced.<BR>

# FALSE - Minimal PCD PPI services (only GetService) will be produced.<BR>

# @Prompt Enable full PEI PCD services.

gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020

## Indicates if the Device Path To Text Protocol should be produced by the platform.

# It can be disabled to save size.<BR><BR>

# TRUE - Device Path To Text Protocol will be produced.<BR>

# FALSE - Device Path To Text Protocol will not be produced.<BR>

# @Prompt Enable Device Path to Text support.

gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037

## Indicates if the Device Path From Text Protocol should be produced by the platform.

# It can be disabled to save size.<BR><BR>

# TRUE - Device Path From Text Protocol will be produced.<BR>

# FALSE - Device Path From Text Protocol will not be produced.<BR>

# @Prompt Enable Device Path From Text support.

gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038

## Indicates if the statistics about variable usage will be collected. This information is

# stored as a vendor configuration table into the EFI system table.

# Set this PCD to TRUE to use VariableInfo application in MdeModulePkg\Application directory to get

# variable usage info. VariableInfo application will not output information if not set to TRUE.<BR><BR>

# TRUE - Statistics about variable usage will be collected.<BR>

# FALSE - Statistics about variable usage will not be collected.<BR>

# @Prompt Enable variable statistics collection.

gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f

## Indicates if Unicode Collation Protocol will be installed.<BR><BR>

# TRUE - Installs Unicode Collation Protocol.<BR>

# FALSE - Does not install Unicode Collation Protocol.<BR>

# @Prompt Enable Unicode Collation support.

gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040

## Indicates if Unicode Collation 2 Protocol will be installed.<BR><BR>

# TRUE - Installs Unicode Collation 2 Protocol.<BR>

# FALSE - Does not install Unicode Collation 2 Protocol.<BR>

# @Prompt Enable Unicode Collation 2 support.

gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041

## Indicates if Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.

# It could be set FALSE to save size.<BR><BR>

# TRUE - Installs Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>

# FALSE - Does not install Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>

# @Prompt Enable ConOut GOP support.

gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042

## Indicates if UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.

# It could be set FALSE to save size.<BR><BR>

# TRUE - Installs UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>

# FALSE - Does not install UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>

# @Prompt Enable ConOut UGA support.

gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043

## Indicates PeiCore will first search TE section from the PEIM to load the image, or PE32 section, when PeiCore dispatches a PEI module.

# This PCD is used to tune PEI phase performance to reduce the search image time.

# It can be set according to the generated image section type.<BR><BR>

# TRUE - PeiCore will first search TE section from PEIM to load the image, if TE section is not found, then PeiCore will search PE section.<BR>

# FALSE - PeiCore will first search PE section from PEIM to load the image.<BR>

# @Prompt PeiCore search TE section first.

gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044

## Indicates if to turn off the support of legacy usb. So legacy usb device driver can not make use of SMI

# interrupt to access usb device in the case of absence of usb stack.

# DUET platform requires the token to be TRUE.<BR><BR>

# TRUE - Turn off usb legacy support.<BR>

# FALSE - Does not turn off usb legacy support.<BR>

# @Prompt Turn off USB legacy support.

gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047

## Indicates if HiiImageProtocol will be installed.

# FALSE is for size reduction.<BR><BR>

# TRUE - Installs HiiImageProtocol.<BR>

# FALSE - Does not install HiiImageProtocol.<BR>

# @Prompt Enable HII image support.

gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100

## Indicates if USB KeyBoard Driver disables the default keyboard layout.

# The default keyboard layout serves as the backup when no keyboard layout can be retrieved

# from HII database.<BR><BR>

# TRUE - USB KeyBoard Driver will disable the default keyboard layout.<BR>

# FALSE - USB KeyBoard Driver will not disable the default keyboard layout.<BR>

# @Prompt Disable default keyboard layout in USB KeyBoard Driver.

gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200

## Indicates if backward compatibility to Framework HII and Framework FvHob is supported.<BR><BR>

# TRUE - Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.

# the PeiCore will handle the framework FvHob and install FvInfo PPI for it.<BR>

# FALSE - Setup Browser doesn't support GUID opcodes generated from Framework HII VFR file by VFR compiler.

# the PeiCore will not handle the framework FvHob and install FvInfo PPI for it.<BR>

# @Prompt Enable framework backward compatibility support.

gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009

## Indicates if HelloWorld Application will print the verbose information.

# This PCD is a sample to explain FeatureFlag PCD usage.<BR><BR>

# TRUE - HelloWorld Application will print the verbose information.<BR>

# FALSE - HelloWorld Application will not print the verbose information.<BR>

# @Prompt Enable HelloWorld print.

gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a

## Indicates if FULL FTW protocol services (total six APIs) will be produced.<BR><BR>

# TRUE - Produces FULL FTW protocol services (total six APIs).<BR>

# FALSE - Only FTW Write service is available.<BR>

# @Prompt Enable FULL FTW services.

gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b

## Indicates if DXE IPL supports the UEFI decompression algorithm.<BR><BR>

# TRUE - DXE IPL will support UEFI decompression.<BR>

# FALSE - DXE IPL will not support UEFI decompression to save space.<BR>

# @Prompt Enable UEFI decompression support in DXE IPL.

gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c

## Indicates if PciBus driver supports the hot plug device.<BR><BR>

# TRUE - PciBus driver supports the hot plug device.<BR>

# FALSE - PciBus driver doesn't support the hot plug device.<BR>

# @Prompt Enable PciBus hot plug device support.

gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d

## Indicates if the PciBus driver probes non-standard, such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.<BR><BR>

# TRUE - PciBus driver probes non-standard granularity for PCI to PCI bridge I/O window.<BR>

# FALSE - PciBus driver doesn't probe non-standard granularity for PCI to PCI bridge I/O window.<BR>

# @Prompt Enable PCI bridge IO alignment probe.

gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e

## Indicates if StatusCode is reported via Serial port.<BR><BR>

# TRUE - Reports StatusCode via Serial port.<BR>

# FALSE - Does not report StatusCode via Serial port.<BR>

# @Prompt Enable StatusCode via Serial port.

gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|FALSE|BOOLEAN|0x00010022

## Indicates if StatusCode is stored in memory.

# The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.<BR><BR>

# TRUE - Stores StatusCode in memory.<BR>

# FALSE - Does not store StatusCode in memory.<BR>

# @Prompt Enable StatusCode via memory.

gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023

## Indicates if PEI phase StatusCode will be replayed in DXE phase.<BR><BR>

# TRUE - Replays PEI phase StatusCode in DXE phased.<BR>

# FALSE - Does not replay PEI phase StatusCode in DXE phase.<BR>

# @Prompt Enable PEI StatusCode replay in DXE phase

gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d

## Indicates if ACPI SDT protocol will be installed.<BR><BR>

# TRUE - Installs ACPI SDT protocol.<BR>

# FALSE - Does not install ACPI SDT protocol.<BR>

# @Prompt Enable ACPI SDT support.

gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d

## Indicates if the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.

# The default value for this PCD is false to disable support for unaligned PCI I/O Protocol requests.<BR><BR>

# TRUE - Enables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>

# FALSE - Disables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>

# @Prompt Enable unaligned PCI I/O support.

gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e

## Indicates if TEXT statement is always set to GrayOut statement in HII Form Browser.<BR><BR>

# TRUE - TEXT statement will always be set to GrayOut.<BR>

# FALSE - TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.<BR>

# @Prompt Always GrayOut TEXT statement.

gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f

## Indicates if unselectable menu should be gray out in HII Form Browser.<BR><BR>

# TRUE - The unselectable menu will be set to GrayOut.<BR>

# FALSE - The menu will be show as normal menu entry even if it is not selectable.<BR>

# @Prompt GrayOut read only menu.

gEfiMdeModulePkgTokenSpaceGuid.PcdBrowerGrayOutReadOnlyMenu|FALSE|BOOLEAN|0x00010070

## Indicates if recovery from IDE disk will be supported.<BR><BR>

# TRUE - Supports recovery from IDE disk.<BR>

# FALSE - Does not support recovery from IDE disk.<BR>

# @Prompt Enable recovery on IDE disk.

gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk|TRUE|BOOLEAN|0x00010060

## Indicates if recovery from FAT floppy disk will be supported.<BR><BR>

# TRUE - Supports recovery from FAT floppy disk.<BR>

# FALSE - Does not support recovery from FAT floppy disk.<BR>

# @Prompt Enable recovery on FAT floppy disk.

gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatFloppyDisk|FALSE|BOOLEAN|0x00010061

## Indicates if recovery from data CD will be supported.<BR><BR>

# TRUE - Supports recovery from data CD.<BR>

# FALSE - Does not support recovery from data CD.<BR>

# @Prompt Enable recovery on data CD.

gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnDataCD|TRUE|BOOLEAN|0x00010062

## Indicates if recovery from FAT USB disk will be supported.<BR><BR>

# TRUE - Supports recovery from USB disk.<BR>

# FALSE - Does not support recovery from USB disk.<BR>

# @Prompt Enable recovery on FAT USB disk.

gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatUsbDisk|TRUE|BOOLEAN|0x00010063

## Indicates if S3 performance data will be supported in ACPI FPDT table.<BR><BR>

# TRUE - S3 performance data will be supported in ACPI FPDT table.<BR>

# FALSE - S3 performance data will not be supported in ACPI FPDT table.<BR>

# @Prompt Enable S3 performance data support.

gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|FALSE|BOOLEAN|0x00010064

## Indicates if Serial device uses half hand shake.<BR><BR>

# TRUE - Serial device uses half hand shake.<BR>

# FALSE - Serial device doesn't use half hand shake.<BR>

# @Prompt Enable Serial device Half Hand Shake

gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHalfHandshake|FALSE|BOOLEAN|0x00010073

## Indicates if HII data and configuration has been exported.<BR><BR>

# Add this PCD mainly consider the use case of simulator. This PCD maybe set to FALSE for

# simulator platform because the performance cost for this feature.

# TRUE - Export HII data and configuration data.<BR>

# FALSE - Does not export HII data and configuration.<BR>

# @Prompt Enable export HII data and configuration to be used in OS runtime.

gEfiMdeModulePkgTokenSpaceGuid.PcdHiiOsRuntimeSupport|TRUE|BOOLEAN|0x00010074

[PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]

## Indicates if DxeIpl should switch to long mode to enter DXE phase.

# It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore

# is built in firmware.<BR><BR>

# TRUE - DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore.<BR>

# FALSE - DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.<BR>

# @Prompt DxeIpl switch to long mode.

gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b

## Indicates if DxeIpl should rebuild page tables. This flag only

# makes sense in the case where the DxeIpl and the DxeCore are both X64.<BR><BR>

# TRUE - DxeIpl will rebuild page tables.<BR>

# FALSE - DxeIpl will not rebuild page tables.<BR>

# @Prompt DxeIpl rebuild page tables.

gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildPageTables|TRUE|BOOLEAN|0x0001003c

[PcdsFixedAtBuild]

## Flag of enabling/disabling the feature of Loading Module at Fixed Address.<BR><BR>

# 0xFFFFFFFFFFFFFFFF: Enable the feature as fixed offset to TOLM.<BR>

# 0: Disable the feature.<BR>

# Other Value: Enable the feature as fixed absolute address, and the value is the top memory address.<BR>

# @Prompt Enable LMFA feature.

# @Expression 0x80000001 | (gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable == 0xFFFFFFFFFFFFFFFF || gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable <= 0x0FFFFFFFFFFFFFFF)

gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015

## Progress Code for OS Loader LoadImage start.<BR><BR>

# PROGRESS_CODE_OS_LOADER_LOAD = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03058000<BR>

# @Prompt Progress Code for OS Loader LoadImage start.

# @ValidList 0x80000003 | 0x03058000

gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderLoad|0x03058000|UINT32|0x30001030

## Progress Code for OS Loader StartImage start.<BR><BR>

# PROGRESS_CODE_OS_LOADER_START = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03058001<BR>

# @Prompt Progress Code for OS Loader StartImage start.

# @ValidList 0x80000003 | 0x03058001

gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderStart|0x03058001|UINT32|0x30001031

## Progress Code for S3 Suspend start.<BR><BR>

# PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03078000<BR>

# @Prompt Progress Code for S3 Suspend start.

# @ValidList 0x80000003 | 0x03078000

gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart|0x03078000|UINT32|0x30001032

## Progress Code for S3 Suspend end.<BR><BR>

# PROGRESS_CODE_S3_SUSPEND_END = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03078001<BR>

# @Prompt Progress Code for S3 Suspend end.

# @ValidList 0x80000003 | 0x03078001

gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033

## Error Code for SetVariable failure.<BR><BR>

# EDKII_ERROR_CODE_SET_VARIABLE = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000002)) = 0x03058002<BR>

# @Prompt Error Code for SetVariable failure.

# @ValidList 0x80000006 | 0x03058002

gEfiMdeModulePkgTokenSpaceGuid.PcdErrorCodeSetVariable|0x03058002|UINT32|0x30001040

[PcdsFixedAtBuild, PcdsPatchableInModule]

## Dynamic type PCD can be registered callback function for Pcd setting action.

# PcdMaxPeiPcdCallBackNumberPerPcdEntry indicates the maximum number of callback function

# for a dynamic PCD used in PEI phase.

# @Prompt Max PEI PCD callback number per PCD entry.

gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f

## VPD type PCD allows a developer to point to an absolute physical address PcdVpdBaseAddress

# to store PCD value.

# @Prompt VPD base address.

gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010

## Maximum number of FV is supported by PeiCore's dispatching.

# @Prompt Maximum number of FV supported by PeiCore.

gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030

## Maximum File count in every FV is supported by PeiCore's dispatching.

# PeiCore supported File type includes PEIM, Combined PEIM and FV.

# @Prompt Maximum File count per FV supported by PeiCore.

gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031

## Maximum stack size for PeiCore.

# @Prompt Maximum stack size for PeiCore.

gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032

## Maximum PPI count is supported by PeiCore's PPI database.

# @Prompt Maximum PPI count supported by PeiCore.

gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033

## The maximum size of a single non-HwErr type variable.

# @Prompt Maximum variable size.

gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003

## The maximum size of a single authenticated variable.

# The value is 0 as default for compatibility that maximum authenticated variable size is specified by PcdMaxVariableSize.

# @Prompt Maximum authenticated variable size.

gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x00|UINT32|0x30000009

## The maximum size of single hardware error record variable.<BR><BR>

# In IA32/X64 platforms, this value should be larger than 1KB.<BR>

# In IA64 platforms, this value should be larger than 128KB.<BR>

# @Prompt Maximum HwErr variable size.

gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004

## The size of reserved HwErr variable space. Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).

# In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region.

# so the platform integrator should ensure this value is less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).

# this value is used to guarantee the space of HwErr type variable and not populated by common variable.

# @Prompt HwErr variable storage size.

gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x0000|UINT32|0x30000006

## The size of maximum user NV variable space.<BR><BR>

# Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR>

# If the value is 0, it means user variable share the same NV storage with system variable,

# this is designed to keep the compatibility for the platform that does not allocate special region for user variable.<BR>

# If the value is non-0, the below 4 types of variables will be regarded as System Variable after EndOfDxe, their property could be got by VarCheck protocol,

# otherwise the variable will be regarded as user variable.<BR>

# 1) UEFI defined variables (gEfiGlobalVariableGuid and gEfiImageSecurityDatabaseGuid(auth variable) variables at least).<BR>

# 2) Variables managed by Variable driver internally.<BR>

# 3) Variables need to be locked, they MUST be set by VariableLock protocol.<BR>

# 4) Important variables during platform boot, their property SHOULD be set by VarCheck protocol.<BR>

# The PCD is used to guarantee the space of system variable and not populated by user variable.<BR>

# @Prompt Maximum user NV variable space size.

gEfiMdeModulePkgTokenSpaceGuid.PcdMaxUserNvVariableSpaceSize|0x00|UINT32|0x00000009

## The size of NV variable space reserved at UEFI boottime.<BR><BR>

# Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR>

# In EdkII implementation, variable driver can reserved some NV storage region for boottime settings.

# So at UEFI runtime, the variable service consumer can not exhaust full NV storage region.<BR>

# Then the common NV variable space size at boottime will be

# (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize),<BR>

# and the common NV variable space size at runtime will be

# (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize) - PcdBoottimeReservedNvVariableSpaceSize.<BR>

# @Prompt Boottime reserved NV variable space size.

gEfiMdeModulePkgTokenSpaceGuid.PcdBoottimeReservedNvVariableSpaceSize|0x00|UINT32|0x30000007

## Reclaim variable space at EndOfDxe.<BR><BR>

# The value is FALSE as default for compatibility that variable driver tries to reclaim variable space at ReadyToBoot event.<BR>

# If the value is set to TRUE, variable driver tries to reclaim variable space at EndOfDxe event.<BR>

# @Prompt Reclaim variable space at EndOfDxe.

gEfiMdeModulePkgTokenSpaceGuid.PcdReclaimVariableSpaceAtEndOfDxe|FALSE|BOOLEAN|0x30000008

## The size of volatile buffer. This buffer is used to store VOLATILE attribute variables.

# @Prompt Variable storage size.

gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005

## FFS filename to find the ACPI tables.

# @Prompt FFS name of ACPI tables storage.

gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016

## FFS filename to find the capsule coalesce image.

# @Prompt FFS name of capsule coalesce image.

gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017

## Maximum number of performance log entries during PEI phase.

# Use PcdMaxPeiPerformanceLogEntries16 if the number of entries required is

# more than 255.

# @Prompt Maximum number of PEI performance log entries.

gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f

## Maximum number of performance log entries during PEI phase.

# If set to 0, then PcdMaxPeiPerformanceLogEntries determines the number of

# entries. If greater than 0, then this PCD determines the number of entries,

# and PcdMaxPeiPerformanceLogEntries is ignored.

# @Prompt Maximum number of PEI performance log entries.

gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries16|0|UINT16|0x00010035

## RTC Update Timeout Value(microsecond).

# @Prompt RTC Update Timeout Value.

gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034

## Indicates the 16550 serial port registers are in MMIO space, or in I/O space. Default is I/O space.<BR><BR>

# TRUE - 16550 serial port registers are in MMIO space.<BR>

# FALSE - 16550 serial port registers are in I/O space.<BR>

# @Prompt Serial port registers use MMIO.

gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000

## Indicates if the 16550 serial port hardware flow control will be enabled. Default is FALSE.<BR><BR>

# TRUE - 16550 serial port hardware flow control will be enabled.<BR>

# FALSE - 16550 serial port hardware flow control will be disabled.<BR>

# @Prompt Enable serial port hardware flow control.

gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001

## Indicates if the 16550 serial Tx operations will be blocked if DSR is not asserted (no cable). Default is FALSE.

# This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.<BR><BR>

# TRUE - 16550 serial Tx operations will be blocked if DSR is not asserted.<BR>

# FALSE - 16550 serial Tx operations will not be blocked if DSR is not asserted.<BR>

# @Prompt Enable serial port cable detetion.

gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006

## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.

# @Prompt Base address of serial port registers.

gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002

## Baud rate for the 16550 serial port. Default is 115200 baud.

# @Prompt Baud rate for serial port.

# @ValidList 0x80000001 | 921600, 460800, 230400, 115200, 57600, 38400, 19200, 9600, 7200, 4800, 3600, 2400, 2000, 1800, 1200, 600, 300, 150, 134, 110, 75, 50

gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003

## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits.<BR><BR>

# BIT1..BIT0 - Data bits. 00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits<BR>

# BIT2 - Stop Bits. 0 = 1 stop bit. 1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.<BR>

# BIT5..BIT3 - Parity. xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity<BR>

# BIT7..BIT6 - Reserved. Must be 0.<BR>

#

# Default is No Parity, 8 Data Bits, 1 Stop Bit.<BR>

# @Prompt Serial port Line Control settings.

# @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl & 0xC0) == 0

gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004

## FIFO Control Register (FCR) for the 16550 serial port.<BR><BR>

# BIT0 - FIFO Enable. 0 = Disable FIFOs. 1 = Enable FIFOs.<BR>

# BIT1 - Clear receive FIFO. 1 = Clear FIFO.<BR>

# BIT2 - Clear transmit FIFO. 1 = Clear FIFO.<BR>

# BIT4..BIT3 - Reserved. Must be 0.<BR>

# BIT5 - Enable 64-byte FIFO. 0 = Disable 64-byte FIFO. 1 = Enable 64-byte FIFO<BR>

# BIT7..BIT6 - Reserved. Must be 0.<BR>

#

# Default is to enable and clear all FIFOs.<BR>

# @Prompt Serial port FIFO Control settings.

# @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl & 0xD8) == 0

gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005

## This setting can override the default TFTP block size. A value of 0 computes

# the default from MTU information. A non-zero value will be used as block size

# in bytes.

# @Prompt TFTP block size.

gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026

## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER

# structure. The default value for this PCD is 0, which means that the DXE Core

# will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB

# boundary as close to the top of memory as feasible. If this PCD is set to a

# value other than 0, then the DXE Core will first attempt to allocate the

# EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified

# by this PCD, and if that allocation fails, retry the allocation on a 4MB

# boundary as close to the top of memory as feasible.

# @Prompt Maximum Efi System Table Pointer address.

gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027

## Indicates if to shadow PEIM on S3 boot path after memory is ready.<BR><BR>

# TRUE - Shadow PEIM on S3 boot path after memory is ready.<BR>

# FALSE - Not shadow PEIM on S3 boot path after memory is ready.<BR>

# @Prompt Shadow Peim On S3 Boot.

gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnS3Boot|FALSE|BOOLEAN|0x30001028

## Indicates if to shadow PEIM and PeiCore after memory is ready.<BR><BR>

# This PCD is used on other boot path except for S3 boot.

# TRUE - Shadow PEIM and PeiCore after memory is ready.<BR>

# FALSE - Not shadow PEIM after memory is ready.<BR>

# @Prompt Shadow Peim and PeiCore on boot

gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnBoot|TRUE|BOOLEAN|0x30001029

## The mask is used to control memory profile behavior.<BR><BR>

# BIT0 - Enable UEFI memory profile.<BR>

# BIT1 - Enable SMRAM profile.<BR>

# @Prompt Memory Profile Property.

# @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask & 0xFC) == 0

gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask|0x0|UINT8|0x30001041

## This flag is to control which memory types of alloc info will be recorded by DxeCore & SmmCore.<BR><BR>

# For SmmCore, only EfiRuntimeServicesCode and EfiRuntimeServicesData are valid.<BR>

#

# Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>

# EfiReservedMemoryType 0x0001<BR>

# EfiLoaderCode 0x0002<BR>

# EfiLoaderData 0x0004<BR>

# EfiBootServicesCode 0x0008<BR>

# EfiBootServicesData 0x0010<BR>

# EfiRuntimeServicesCode 0x0020<BR>